- SKU:
LPS-T10 | Fully linear Power Supply Upgrade Kit for Eversolo T10
10% off
$668.00
$598.00
Shipping calculated at checkout.
Description
LPS-T10 brings fully linear power to the Eversolo T10. Factory mounting locations and connectors preserve the original exterior, controls and all functions.
POWER ARCHITECTURE
Fully
linear.
Two dedicated transformers.
Talema
Linear power for display, control & standby.
Custom toroidal
LHY Audio main transformer with 7N copper windings.
RIPPLE REDUCTION
94.82%
Lower ripple
vs. stock supply.*
FILTER CAPACITANCE
3.2×
Approx. 3.2 times the stock main-filter capacitance.
LT4320
Ideal rectification paired with ultra-low-noise linear regulation.
* Ripple measured by LHY Audio versus the stock supply at the rated 3 A full-load condition.
Current pre-orders are for Batch 2.
Each LPS-T10 features a bespoke transformer handcrafted by LHY Audio and is offered in batches.
Batch 1 · Sold out
Ships from Sep 15
Ships from Sep 15
Batch 2 · Pre-order now
Ships from Sep 22
Ships from Sep 22
Batch 3
Ships from Sep 29
Ships from Sep 29
Regular pricing will resume once the first three batches sell out.
In stock!
People are currently viewing this
Free Shipping Wordwide
Manufacturer’s Warranty
Official Technical Support
Explore the LPS-T10
Explore the LPS-T10
Purpose-built by LHY Audio for Eversolo T10
LPS-T10
From mixed power to a dual-transformer, fully linear architecture.
A dual-transformer, fully linear architecture further optimizes the T10’s internal power.
Original-location fit · no external enclosure · no chassis cutting
Take the T10 further. Start with power.
System-level power upgrade
The entire power chain, refined at every stage.
Main-filter capacitance
Power architecture
Dedicated transformers
Six coordinated stages
From input filtering to low-noise output.
-
01Input filtering
Two-stage EMI
→ -
02Dedicated transformers
Main / control-side
→ -
03Ideal rectification
LT4320 full-wave
→ -
04Energy storage
90,000 µF
→ -
05Linear regulation
LT3042 + PNP
→ -
06Filtered output
Wideband + OCC
Laboratory measurement
The 3 A laboratory high-load test record shows a 94.82% ripple reduction.
Under the same LHY Audio laboratory conditions, with only the power supply changed, the Original T10 PSU measured 61.67 µVrms and LPS-T10 measured 3.192 µVrms.
Original T1061.67 µVrms
LHY Audio LPS-T103.192 µVrms
Tested under controlled conditions in the LHY Audio laboratory. Under the same 3 A high-load condition, only the power-supply assembly was changed. The 94.82% figure is the reduction calculated from this test record; readings can fluctuate and the value is not guaranteed.
Three core modules
Three core modules form the fully linear architecture.
The system combines a main DC regulator board, an AC input and auxiliary linear module, and a custom main transformer designed around the T10 chassis.
Power architecture
| Feature | Original T10 | LPS-T10 | Engineering change |
|---|---|---|---|
| System design | Original T10Linear main supply with switch-mode power retained for display, control and standby circuits. | LPS-T10Dual-transformer, fully linear architecture with dedicated main and control-side supply paths. | Engineering changeReplaces switch-mode power for the display, control and standby circuits with a dedicated linear supply path. |
Module 01
Main DC supply
DC Linear Regulator Board
Handles rectification, energy storage, regulation and output filtering for the main supply.
Product highlights
Low-drop rectification
Designed to reduce forward-voltage drop and related dissipation at the rectifier stage.
3.19× main-filter capacitance
Main-filter capacitance increases from 28,200 µF to 90,000 µF.
Low-noise linear regulation
Uses an LT3042 regulator with PNP current expansion.
Wideband output filtering
Designed to address residual ripple and high-frequency noise.
DC Linear Regulator Board
| Feature | Original T10 | LPS-T10 | Engineering change |
|---|---|---|---|
| Rectification | Original T10MUR860 fast-recovery rectifier diodes. | LPS-T10LT4320 full-wave ideal-diode rectification. | Engineering changeDesigned to reduce forward-voltage loss and related dissipation. |
| Main-filter capacitance | Original T10ELNA 4,700 µF / 35 V × 6 · 28,200 µF total. | LPS-T10KEMET ALC70A 15,000 µF / 40 V × 6 · 90,000 µF total. | Engineering change3.19× the stock main-filter capacitance, increasing nominal energy-storage capacity. |
| Regulation architecture | Original T10OPA277 op-amp with MOSFET regulation. | LPS-T10ADI LT3042 ultra-low-noise linear regulation with PNP current expansion. | Engineering changeUses a low-noise linear-regulation architecture. |
| Output filtering | Original T10SamYoung 470 µF / 50 V × 30. | LPS-T10Nichicon KZ MUSE 470 µF / 25 V × 6 plus Panasonic FM 1,000 µF / 16 V × 9. | Engineering changeDesigned to address residual ripple and high-frequency noise. |
| PCB and assembly | Original T101.6 mm immersion-gold PCB. | LPS-T102 oz copper, 2.0 mm immersion-gold PCB with premium solder and thick gold-plated pins. | Engineering changeA heavier-copper power path with robust connection hardware. |
Module 02
AC input and auxiliary supply
EMI & Linear Input Module
Filters the AC input and provides dedicated linear auxiliary power for the display, control and standby circuits.
Product highlights
Front-end interference filtering
Designed to treat line-borne interference before the transformer and regulator stages.
Dedicated linear auxiliary supply
Provides a separate linear supply path for display, control and standby circuits.
Filtering with a low-resistance path
Designed to combine common-mode filtering with a low-resistance current path.
Current and thermal design
The heavier power path is designed for current handling and thermal spreading.
EMI & Linear Input Module
| Feature | Original T10 | LPS-T10 | Engineering change |
|---|---|---|---|
| EMI filter architecture | Original T10Basic two-stage common-mode filtering with standard safety capacitors. | LPS-T10Two-stage common-mode filtering with RIFA / Eaton X2 safety capacitors. | Engineering changeDesigned to treat line-borne interference before the transformer and regulator stages. |
| Safety capacitors | Original T10Standard safety capacitors. | LPS-T10RIFA / Eaton PME271 X2 and Y2 safety capacitors. | Engineering changeCertified safety components selected for AC-line filtering and suppression. |
| Common-mode chokes | Original T10E-core, compact-wound common-mode chokes. | LPS-T10Two custom high-permeability toroidal cores with heavy-gauge OFC windings. | Engineering changeDesigned to combine AC filtering with a low-resistance current path. |
| Input-voltage selection | Original T10Automatic relay selection. | LPS-T10Manual 115 V / 230 V terminal selection before power-on. | Engineering changeA direct terminal path; the correct setting must be confirmed before use. |
| PCB and assembly | Original T10Standard 1.6 mm immersion-gold PCB. | LPS-T102.5 oz copper, 2.0 mm immersion-gold PCB with premium solder. | Engineering changeHeavy copper supports current handling and thermal spreading. |
Module 03
Purpose-built magnetic foundation
LHY Audio Custom Main Transformer
Serves the main supply as part of the system’s dual-transformer architecture.
Product highlights
Purpose-built for T10
The magnetic path, shielding and grounding are designed around the T10 main supply.
Dedicated main-supply role
Works separately from the control-side auxiliary supply within the dual-transformer architecture.
Primary and secondary shielding
Shielding is applied to both winding sides as part of the in-chassis shielding design.
Dedicated grounding
A separate grounding path is integrated with the transformer’s shielding structure.
LHY Audio Custom Main Transformer
| Feature | Original T10 | LPS-T10 | Engineering change |
|---|---|---|---|
| Construction details | Original T10Eversolo specifies a custom O-Type toroidal linear transformer with a closed-loop magnetic design; core material, winding construction and detailed electrical specifications are not disclosed. | LPS-T10Nisshin 0.27 mm silicon-steel core, Rowan UK 7N OFC windings, primary/secondary copper-foil shielding, independent grounding and heat-resistant PTFE leads. | Engineering changePurpose-built magnetic and shielding design for the T10 main supply path. |
Supporting parts & installation
Designed around the T10’s original space, mounting points and connectors.
The core modules and prepared wiring are designed around the original T10 mounting positions and connectors, keeping the exterior and controls unchanged.
DC regulator board
Ideal rectification, 90,000 µF main filtering and ultra-low-noise regulation.
EMI & linear input module
Talema-powered auxiliary rails with two-stage AC input filtering.
Custom main transformer
LHY Audio-designed toroidal transformer with 7N OFC windings.
Prepared internal wiring
OCC output cable set and 6-pin ribbon cables for the T10 layout.
Factory-location fit
Original-location fit. No chassis cutting.
LPS-T10 is designed around the T10’s original internal space, mounting points and connectors. No chassis cutting is required, and the original exterior and controls remain unchanged.
View installation guide (PDF)- Uses the original mounting points
- Connects through the original internal connectors
- No chassis cutting required
- Exterior and controls remain unchanged
Measurement record
Microvolt-level ripple at no load and at the 3 A test load.
Original T10 and LPS-T10 are shown side by side under two laboratory test conditions.
Test condition 01
No load
At no load, measured ripple falls from 27.65 µVrms to 2.726 µVrms.
90.14%Recorded reduction
Test condition 02
3 A test load
At the 3 A laboratory test load, measured ripple falls from 61.67 µVrms to 3.192 µVrms.
94.82%Recorded reduction at 3 A high load
Measured in the LHY Audio laboratory; within each paired comparison at the same load condition, only the power-supply assembly was changed. The 3 A figure denotes the laboratory test-load condition, not an output specification. Readings can fluctuate with measurement setup and unit tolerance; the percentages shown are calculated from the corresponding test records and are not guaranteed values.
Technical specifications
LPS-T10 technical specifications.
Product typeInternal fully linear power-supply upgrade kit
Compatible hostEversolo T10
ArchitectureFully linear, dual-transformer
AC input115 V or 230 V AC · manual selection
Regulated output12 V DC
Main transformerLHY Audio custom toroidal transformer · 7N OFC windings
Main-filter capacitance90,000 µF · approximately 3.2× stock
RectificationLT4320-based full-wave ideal rectification
Linear regulationADI LT3041 on the auxiliary board and LT3042 on the main DC board, both with PNP current expansion
Output wiringOCC cable set
Questions, answered
LPS-T10 FAQ
What changes compared with the original T10 power supply?
Compared with the original T10, LPS-T10 optimizes the entire power path stage by stage: AC-input filtering, a fully linear architecture, LT4320-based ideal rectification, 90,000 µF of main-filter capacitance versus the original 28,200 µF, LT3042 + PNP low-noise regulation, wideband output filtering and OCC output wiring. Together, these changes form a complete power-chain upgrade and produced lower recorded ripple under both test conditions shown on this page.
Why use two transformers?
The two transformers give each supply path a dedicated role. The LHY Audio-designed 7N OFC transformer serves the main supply, while a Talema transformer with linear regulation powers the display, control and standby circuits. Each path can therefore be designed around its own load. Making the control-side supply linear also removes the original auxiliary switch-mode stage as a potential source of high-frequency switching noise.
How was the 94.82% ripple reduction in the 3 A high-load test record calculated?
The page records two laboratory test conditions: no load and a 3 A high-load condition. At no load, the Original T10 measured 27.65 µVrms and LPS-T10 measured 2.726 µVrms; at 3 A, the readings were 61.67 µVrms and 3.192 µVrms respectively. The ripple reduction in the 3 A high-load test record is calculated as (61.67 − 3.192) ÷ 61.67 = 94.82%. Readings may fluctuate and are not guaranteed; 3 A denotes the laboratory test-load condition, not an output specification.
Is LPS-T10 plug-and-play?
LPS-T10 is an internal upgrade kit and requires opening the chassis. Follow the installation guide to disconnect the relevant ribbon cables, remove the original power-supply components, and install the new modules at the original mounting points and connectors. Disconnect mains power and allow sufficient capacitor-discharge time before starting; if you are not comfortable working inside audio equipment, use a qualified technician.
Does lower ripple guarantee the same audible result in every system?
Under the same test conditions, lower ripple means less residual AC riding on the DC supply, which can help reduce the opportunity for power-supply noise to couple into downstream circuitry. In some highly resolving systems, this may be perceived as a quieter background and clearer low-level detail. The audible degree will still vary with the complete system, mains quality, setup, room and listener.
LPS-T10 is an aftermarket upgrade product designed for use with Eversolo T10. Eversolo is a trademark of its owner and is referenced only to identify compatibility.
The components shown reflect the current product design. Subject to supply availability, individual parts may be replaced with equivalent alternatives serving the same function and meeting no lower rated parameters, safety classifications and reliability requirements. Changes affecting the core architecture, key advertised specifications or compatibility will be disclosed on the product page.