LPS-T8
LPS-T8
Nearly 90% Lower Output Ripple
Renovación de toda la cadena de alimentación
La presentación de la actualización se divide en tres partes.
Placa reguladora lineal de CC
This board handles the upgraded DC supply stage, converting the transformer output into a quieter, lower-impedance feed for the T8 audio circuitry. The materials below identify the key parts, while the table shows how they improve on the stock design.
| Característica | Versión original del Eversolo T8 | LHY Audio LPS-T8 | Ventajas de la actualización |
|---|---|---|---|
| Rectificación |
Puente de diodos MUR860 Fast Recovery Rectifier Diodes |
ACTUALIZACIÓN LT4320 High-Performance Full-Wave Ideal Rectifier
2.0mm PCB, 2.5oz heavy copper, immersion-gold finish PCB
WBT Solder & Thick Gold-Plated Pins
|
Reduced rectifier lossActive rectification helps reduce voltage drop and heat generation compared with conventional diode bridges.
Suministro estable de corrienteImproves voltage stability and current delivery under load.
|
| Condensadores de filtrado principal |
6800µF/35V ×6 Condensadores originales |
ACTUALIZACIÓN Nichicon KG Series (Para alta fidelidad)
10,000µF/50V ×4 — higher capacity & voltage rating
|
Higher Energy ReserveNichicon KG 10,000µF / 50V capacitors provide higher reserve capacity for the DC regulation stage, supporting stable current delivery under load
Superior ripple rejectionHigher 50V rating and 10,000µF capacity for improved dynamic resolution
|
| Topología de regulación |
Op-Amp + MOS-FET OPA277 Op-Amp + MOS-FET Regulation |
ACTUALIZACIÓN ADI LT3042 Ultra-Low Noise Linear Regulator
PNP Current Boosting for robust load handling
|
0.8µV RMS device noiseLT3042 is specified for ultra-low-noise regulation, supporting a lower-noise DC output stage.
Unmatched precisionTop-tier voltage purity for the most critical audio circuits
|
| Filtrado de salida |
1000µF/25V ×18 Stock Capacitors + Small WIMA Film ×2 |
ACTUALIZACIÓN Nichicon FW Series 1000µF/25V ×12
WIMA Film Capacitors 0.1µF/1000V ×3
|
Low-ESR audio gradeProfessional audio capacitors for excellent high-frequency response and superior filtering performance
|
| PCB y calidad de fabricación |
1.6mm PCB Immersion Gold PCB, standard process |
ACTUALIZACIÓN 2.0mm PCB thickness, 2.5oz heavy copper, immersion-gold finish
Selected WBT solder
|
Lower impedanceHeavy copper traces reduce impedance and improve heat dissipation
Fiabilidad de las conexionesSelected hand-soldered power-path joints use WBT solder, together with gold-plated connection pins, to support secure contact and long-term connection reliability.
|
Placa de filtro EMI de CA
La placa de filtrado de CA trata la alimentación de red antes de que llegue al transformador y a la etapa de regulación. Su función es reducir las interferencias procedentes de la red, mantener el suministro de corriente y proporcionar un punto de partida más limpio para el resto de la cadena de alimentación.
| Característica | Versión original del Eversolo T8 | LHY Audio LPS-T8 | Ventajas de la actualización |
|---|---|---|---|
| Arquitectura de filtrado |
Standard 2-Stage Standard two-stage filter with generic safety capacitors |
ACTUALIZACIÓN Advanced Two-Stage EMI Filter
Dual common-mode chokes
Swedish RIFA X2/Y2 safety capacitors
|
Superior rejectionHelps improve rejection of line-borne interference across a wide frequency range
|
| Condensadores de seguridad |
Grado industrial Standard industrial-grade safety capacitors |
ACTUALIZACIÓN Swedish RIFA PME271 Series
X2 & Y2 safety-rated capacitors
|
Safety-rated FilteringSwedish RIFA X2/Y2 capacitors are used for stable AC line filtering and suppression of line-borne interference
Cleaner AC FoundationHelps reduce incoming mains noise before it reaches the transformer and regulation stage, supporting a cleaner power foundation for the T8
|
| Choques de modo común |
Inductores de núcleo E E-core chokes with small-gauge windings |
ACTUALIZACIÓN Custom Large Toroidal Chokes ×2
High-permeability cores
Thick Oxygen-Free Copper (OFC) wire
|
Manejo estable de la corrienteLarge toroidal chokes support stable current handling and AC line filtering.
Lower Winding ResistanceOFC windings help reduce winding resistance and support efficient current delivery.
|
| Selección de tensión |
Auto Relay Automatic relay switching via voltage sensing circuit |
ACTUALIZACIÓN Manual 110V/220V Terminal Jumper
Direct hard-wired AC power path
|
SAC power pathMinimal contact resistance — Fewer relay contacts in the AC input path help reduce contact resistance and improve long-term reliability.
Conexión de alimentación estableA direct terminal-jumper design avoids relay switching in the AC input path and keeps the power connection simple and robust.
|
| PCB y calidad de fabricación |
1.6mm PCB Standard 1.6mm Immersion Gold PCB |
ACTUALIZACIÓN 2.0mm PCB thickness, 2.5oz heavy copper, immersion-gold finish
Carefully Hand-Soldered Power-Path Components
|
Enhanced shieldingHeavy copper improves current handling and thermal spreading, while the immersion-gold finish supports oxidation resistance and long-term solderability.
|
Sedlbauer Shielded Toroidal Transformer
The transformer section supplies the magnetic foundation for the upgrade. This module focuses on cleaner source power, reduced leakage, and better isolation before the current reaches the DC regulation stage.
| Característica | Versión original del Eversolo T8 | LHY Audio LPS-T8 | Ventajas de la actualización |
|---|---|---|---|
| Transformador |
Transformador original Unidad estándar instalada de fábrica |
ACTUALIZACIÓN Genuine German Sedlbauer Flagship Series Toroidal Transformer |
Low magnetic leakageAdvanced low-magnetic-leakage design with dual-layer shielded structure and independent grounding
Enhanced EMI/RFI rejectionCompared with the stock transformer, the shielded Sedlbauer toroidal transformer helps reduce magnetic leakage and provides a cleaner source for the downstream regulation stage
German precisionHigh-quality Sedlbauer toroidal core supports stable source power and helps reduce magnetic leakage
|
Kit completo para una instalación interna ordenada
The LPS-T8 package includes the three core modules, dedicated wiring, and mounting accessories required for a clean internal installation.
Placa reguladora lineal de CC
Módulo principal de alimentación lineal de bajo ruido para la ruta de alimentación actualizada.
Placa de filtro EMI de CA
Two-stage interference suppression with premium safety capacitors.
Sedlbauer Transformer
Shielded German toroidal transformer for cleaner source power.
Mazo de cables específico
Conectores y cableado preparados para una instalación interna ordenada.
Accesorios de montaje
Professional installation tools: 2.0 mm hex key, 4.0 mm hex key, M5/M6 nut wrench, Phillips screwdriver, and gloves.
Actualización reversible, sin cortar el chasis
The LPS-T8 kit is designed as a clean replacement path for the original PSU assembly. The factory parts can remain intact, the chassis does not need cutting, and the upgrade can be reversed if future service requires it.
Guía de instalación en PDF
Download the official guide before installation and follow the screw sequence, wiring map, and final safety checks step by step.
Measured Under Controlled Bench Conditions
Ripple noise performance is verified with a dedicated bench setup and then reported under idle and full 2A load conditions, so the upgrade can be evaluated by measured electrical behavior as well as listening impressions.
Configuración de la prueba de banco
The measurement setup verifies the upgraded power path under controlled input, load, and probing conditions before the ripple results are reported below.
Ruido de rizado: fuente original frente a LPS-T8
Lower microvolt ripple means cleaner current delivery and a darker electrical noise floor.
| Punto de comparación | Eversolo T8 original | LHY Audio LPS-T8 | Resultado |
|---|---|---|---|
| Ruido de rizado | Factory PSU reference: 32.09µV | 3.556µV even under full 2A load | Approximately 89% lower ripple than the stock reference. |
| Ruido de fondo en reposo | Stock switching architecture leaves more residual ripple. | 2.557µV static ripple at idle. | Cleaner background before playback begins. |
| Estabilidad bajo carga | Higher ripple rises against the upgraded linear supply baseline. | Maintains microvolt-level noise at full 2A load. | Stable current delivery with stronger dynamic headroom. |
Reserved for the oscilloscope capture that documents the idle-state measurement shown above.
Reserved for the full-load capture that supports the 2A ripple-noise result.