LPS-T8
LPS-T8
Nearly 90% Lower Output Ripple
Een volledig heropgebouwde voedingsketen
De upgrade wordt in drie productonderdelen beschreven.
Lineaire DC-regelprint
This board handles the upgraded DC supply stage, converting the transformer output into a quieter, lower-impedance feed for the T8 audio circuitry. The materials below identify the key parts, while the table shows how they improve on the stock design.
| Kenmerk | Eversolo T8 in originele uitvoering | LHY Audio LPS-T8 | Voordelen van de upgrade |
|---|---|---|---|
| Gelijkrichting |
Diodebrug MUR860 Fast Recovery Rectifier Diodes |
UPGRADE LT4320 High-Performance Full-Wave Ideal Rectifier
2.0mm PCB, 2.5oz heavy copper, immersion-gold finish PCB
WBT Solder & Thick Gold-Plated Pins
|
Reduced rectifier lossActive rectification helps reduce voltage drop and heat generation compared with conventional diode bridges.
Stabiele stroomleveringImproves voltage stability and current delivery under load.
|
| Hoofdfiltercondensatoren |
6800µF/35V ×6 Originele condensatoren |
UPGRADE Nichicon KG Series (HiFi-kwaliteit)
10,000µF/50V ×4 — higher capacity & voltage rating
|
Higher Energy ReserveNichicon KG 10,000µF / 50V capacitors provide higher reserve capacity for the DC regulation stage, supporting stable current delivery under load
Superior ripple rejectionHigher 50V rating and 10,000µF capacity for improved dynamic resolution
|
| Regeltopologie |
Op-Amp + MOS-FET OPA277 Op-Amp + MOS-FET Regulation |
UPGRADE ADI LT3042 Ultra-Low Noise Linear Regulator
PNP Current Boosting for robust load handling
|
0.8µV RMS device noiseLT3042 is specified for ultra-low-noise regulation, supporting a lower-noise DC output stage.
Unmatched precisionTop-tier voltage purity for the most critical audio circuits
|
| Uitgangsfiltering |
1000µF/25V ×18 Stock Capacitors + Small WIMA Film ×2 |
UPGRADE Nichicon FW Series 1000µF/25V ×12
WIMA Film Capacitors 0.1µF/1000V ×3
|
Low-ESR audio gradeProfessional audio capacitors for excellent high-frequency response and superior filtering performance
|
| Printplaat en bouwkwaliteit |
1.6mm PCB Immersion Gold PCB, standard process |
UPGRADE 2.0mm PCB thickness, 2.5oz heavy copper, immersion-gold finish
Selected WBT solder
|
Lower impedanceHeavy copper traces reduce impedance and improve heat dissipation
Betrouwbaarheid van de verbindingenSelected hand-soldered power-path joints use WBT solder, together with gold-plated connection pins, to support secure contact and long-term connection reliability.
|
EMI-netfilterprint
De netfilterprint behandelt de inkomende netvoeding voordat deze de transformator en regeltrap bereikt. De functie is om netgebonden storingen te verminderen, de stroomlevering op peil te houden en een schoner uitgangspunt voor de rest van de voedingsketen te creëren.
| Kenmerk | Eversolo T8 in originele uitvoering | LHY Audio LPS-T8 | Voordelen van de upgrade |
|---|---|---|---|
| Filterarchitectuur |
Standard 2-Stage Standard two-stage filter with generic safety capacitors |
UPGRADE Advanced Two-Stage EMI Filter
Dual common-mode chokes
Swedish RIFA X2/Y2 safety capacitors
|
Superior rejectionHelps improve rejection of line-borne interference across a wide frequency range
|
| Veiligheidscondensatoren |
Industriële kwaliteit Standard industrial-grade safety capacitors |
UPGRADE Swedish RIFA PME271 Series
X2 & Y2 safety-rated capacitors
|
Safety-rated FilteringSwedish RIFA X2/Y2 capacitors are used for stable AC line filtering and suppression of line-borne interference
Cleaner AC FoundationHelps reduce incoming mains noise before it reaches the transformer and regulation stage, supporting a cleaner power foundation for the T8
|
| Common-mode-spoelen |
Smoorspoelen met E-kern E-core chokes with small-gauge windings |
UPGRADE Custom Large Toroidal Chokes ×2
High-permeability cores
Thick Oxygen-Free Copper (OFC) wire
|
Stabiele stroomverwerkingLarge toroidal chokes support stable current handling and AC line filtering.
Lower Winding ResistanceOFC windings help reduce winding resistance and support efficient current delivery.
|
| Netspanningskeuze |
Auto Relay Automatic relay switching via voltage sensing circuit |
UPGRADE Manual 110V/220V Terminal Jumper
Direct hard-wired AC power path
|
SAC power pathMinimal contact resistance — Fewer relay contacts in the AC input path help reduce contact resistance and improve long-term reliability.
Stabiele voedingsverbindingA direct terminal-jumper design avoids relay switching in the AC input path and keeps the power connection simple and robust.
|
| Printplaat en bouwkwaliteit |
1.6mm PCB Standard 1.6mm Immersion Gold PCB |
UPGRADE 2.0mm PCB thickness, 2.5oz heavy copper, immersion-gold finish
Carefully Hand-Soldered Power-Path Components
|
Enhanced shieldingHeavy copper improves current handling and thermal spreading, while the immersion-gold finish supports oxidation resistance and long-term solderability.
|
Sedlbauer Shielded Toroidal Transformer
The transformer section supplies the magnetic foundation for the upgrade. This module focuses on cleaner source power, reduced leakage, and better isolation before the current reaches the DC regulation stage.
| Kenmerk | Eversolo T8 in originele uitvoering | LHY Audio LPS-T8 | Voordelen van de upgrade |
|---|---|---|---|
| Transformator |
Originele transformator Standaard af fabriek geïnstalleerde uitvoering |
UPGRADE Genuine German Sedlbauer Flagship Series Toroidal Transformer |
Low magnetic leakageAdvanced low-magnetic-leakage design with dual-layer shielded structure and independent grounding
Enhanced EMI/RFI rejectionCompared with the stock transformer, the shielded Sedlbauer toroidal transformer helps reduce magnetic leakage and provides a cleaner source for the downstream regulation stage
German precisionHigh-quality Sedlbauer toroidal core supports stable source power and helps reduce magnetic leakage
|
Complete kit voor een nette installatie
The LPS-T8 package includes the three core modules, dedicated wiring, and mounting accessories required for a clean internal installation.
Lineaire DC-regelprint
De kernmodule voor een ruisarme lineaire voeding in het verbeterde voedingspad.
EMI-netfilterprint
Two-stage interference suppression with premium safety capacitors.
Sedlbauer Transformer
Shielded German toroidal transformer for cleaner source power.
Specifieke kabelboom
Voorbereide connectoren en bedrading voor een nette interne installatie.
Montageaccessoires
Professional installation tools: 2.0 mm hex key, 4.0 mm hex key, M5/M6 nut wrench, Phillips screwdriver, and gloves.
Omkeerbare upgrade, zonder snijwerk aan de behuizing
The LPS-T8 kit is designed as a clean replacement path for the original PSU assembly. The factory parts can remain intact, the chassis does not need cutting, and the upgrade can be reversed if future service requires it.
Installatiehandleiding in PDF
Download the official guide before installation and follow the screw sequence, wiring map, and final safety checks step by step.
Measured Under Controlled Bench Conditions
Ripple noise performance is verified with a dedicated bench setup and then reported under idle and full 2A load conditions, so the upgrade can be evaluated by measured electrical behavior as well as listening impressions.
Meetopstelling voor controle
The measurement setup verifies the upgraded power path under controlled input, load, and probing conditions before the ripple results are reported below.
Rimpelruis: fabrieksvoeding tegenover LPS-T8
Lower microvolt ripple means cleaner current delivery and a darker electrical noise floor.
| Vergelijkingspunt | Originele Eversolo T8 | LHY Audio LPS-T8 | Resultaat |
|---|---|---|---|
| Rimpelruis | Factory PSU reference: 32.09µV | 3.556µV even under full 2A load | Approximately 89% lower ripple than the stock reference. |
| Ruisvloer bij inactiviteit | Stock switching architecture leaves more residual ripple. | 2.557µV static ripple at idle. | Cleaner background before playback begins. |
| Stabiliteit onder belasting | Higher ripple rises against the upgraded linear supply baseline. | Maintains microvolt-level noise at full 2A load. | Stable current delivery with stronger dynamic headroom. |
Reserved for the oscilloscope capture that documents the idle-state measurement shown above.
Reserved for the full-load capture that supports the 2A ripple-noise result.