FER
Two network zones.
Connected by light.
Place FER between your upstream network and your player. Its internal fiber link connects the two zones, bringing optical isolation into a familiar Ethernet setup.
One fiber link.
LAN IN and LAN OUT exchange network data through an internal optical link, without a direct electrical connection in that data path.
One of each in each network zone.
Internal reference clock architecture.
Between your network
and your music.
Connect a router or switch to LAN IN and your network player to LAN OUT. With Ethernet cables at both ends, traffic between the zones still travels through FER’s internal optical link.
Only traffic crossing between LAN IN and LAN OUT uses the internal optical link. Communication within one zone does not. External optical connections require compatible modules, fiber and equipment.
The optical link
is already inside.
Two network sections are connected by fiber inside the chassis. Use RJ45 or a compatible external optical connection on either side to suit your system.
One reference. Two zones.
An SC-cut OCXO and Si5381A PLL provide clock references for the network circuitry.
Built around the circuit.
Clock, PLL and network sections use regulation stages suited to their respective functions.
10 MHz, when you need it.
The 50 Ω BNC input accepts a compatible external 10 MHz reference. FER also works with its internal clock.
The essentials.
Specifications
Good to know.
Do I need external fiber cables?
No. For an RJ45 connection on each side, the fiber link between the zones is already inside FER.
Does all traffic pass through the internal fiber?
No. Only traffic between LAN IN and LAN OUT crosses the internal optical link. Communication within a zone does not.
Do I need an external clock?
No. FER includes an internal OCXO and PLL. A compatible external 10 MHz reference is optional.
Can I use an external optical link?
Yes, with compatible Gigabit SFP modules, matching fiber and a compatible device at the other end. Verify compatibility before connecting.
Is FER a streamer or DAC?
No. FER is a network device used alongside your existing network player and audio system.
A considered connection.
Internal optical architecture, designed for your audio network.
Explore FER on the LHY Audio website
